Remote Control - Pioneer VSX-5231 Operating Instructions Manual

1
1

Remote control

1
RECEIVER
SLEEP SOURCE
2
RECEIVER
3
INPUT
4
5
SIGNAL SEL
6
7
8
AUDIO TOOLS
PARAMETER MENU
TOP
MENU
9
ENTER
10
HOME
MENU
PTY BAND
iPod CTRL RETURN
MUTE
11
1 2 3
DISP
4 5 6
CH
12
7 8 9 CH
0
CLR ENTER
RECEIVER
As for operating other devices, the remote control codes for
the Pioneer products are preset. The settings cannot be
changed.
13
1
SLEEP
Press to change the amount of time before the receiver
switches into standby (30 min – 60 min – 90 min – Off). You
can check the remaining sleep time at any time by pressing
once.
SLEEP
14
2
RECEIVER
Switches the receiver between standby and on.
3
RECEIVER
Switches the remote to control the receiver (used to select the
white commands above the number buttons (MIDNIGHT,
etc)). Also use this button to set up surround sound
or Audio parameters
4
INPUT SELECT
Use to select the input source
5
Input function buttons
Use to select the input source to this receiver
will enable you to control other Pioneer components with the
remote control.
15
6
SIGNAL SEL
Press to select the audio input signal of the component to play
back (page 21).
7
Sound control buttons
16
– Press to switch on/off Acoustic Calibration
Acous.EQ
EQ setting (page
– Press to restore CD quality sound to
S.RETRIEVER
compressed audio sources
– Press to switch on/off Phase Control
PHASE
17
8
Listening mode and component control buttons
– Switches between Auto surround mode
AUTO/DIRECT
(page 26) and Stream Direct playback
– Press to select stereo playback
STEREO
ALC/STANDARD SURR
and to switch between the modes of 2 Pro Logic II and
NEO:6, and the Auto level control stereo mode
– Switches between the various surround
ADV SURR
modes (page 27).
(page 30)
(page 28).
(page 21).
(page 21). This
27).
(page 27).
(page 27).
(page 27).
(page 26).
– Press for standard decoding
(page 26).
8
Controls and displays
– Switches between ECO Mode 1/ECO Mode 2. When
ECO
ECO Mode is turned ON, the display will go dark
9
Receiver and component control buttons
The following button controls can be accessed after you have
selected the corresponding input function button (BD, DVD,
etc.).
Press first to access:
RECEIVER
– Use to access the Audio options
AUDIO PARAMETER
(page 28).
– Press to access the Home Menu
HOME MENU
(page 30).
– Confirm and exit the current menu screen.
RETURN
Press or first to access:
BD DVD
– Displays the disc 'top' menu of a Blu-ray
TOP MENU
Disc/DVD.
– Displays the HOME MENU screen.
HOME MENU
– Confirm and exit the current menu screen.
RETURN
– Displays the TOOLS menu of Blu-ray Disc player.
MENU
Press first to access:
TUNER
– Memorizes stations for recall, also used to
TOOLS
change the name (page 25).
– Switches between AM, FM ST (stereo) and FM
BAND
MONO radio bands (page 25).
Press first to access:
iPod/USB
– Switches between the iPod controls and the
iPod CTRL
receiver controls (page 23).
/// (TUNE /, /),
10
PRESET
Use the arrow buttons when setting up your surround sound
system (page 30). Also used to control Blu-ray Disc/DVD
menus/options.
Use TUNE / can be used to find radio frequencies and
PRESET / can be used to select preset radio stations
(page 25).
4
(page 27).
6
34
ENTER