❼ Optimizing Computer Signal Automatically; Adjusting The Image Using Auto Adjust; ❽ Turning Up Or Down Volume - Dukane 6530B User Manual

❼ Optimizing Computer Signal Automatically

Adjusting the Image Using Auto Adjust

Optimizing a computer image automatically. (COMPUTER)
Press the AUTO ADJ. button to optimize a computer image automatically.
This adjustment may be necessary when you connect your computer
for the first time.
NOTE:
Some signals may take time to display or may not be displayed correctly.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and [PHASE]
manually. (→ page 62, 63)
❽ Turning Up or Down Volume
Sound level from the speaker or audio output can be adjusted.
TIP: When no menus appear, the ◀ and ▶ buttons on the projector
cabinet work as a volume control.
NOTE:
• Volume control is not available with the ◀ or ▶ button when an
image is magnified by using the D-ZOOM (+) button or when the
menu is displayed.
• Volume control is not available with the ◀ or ▶ button when
VIEWER is used.
TIP: The [BEEP] sound volume cannot be adjusted. To turn off the
[BEEP] sound, from the menu, select [SETUP] → [OPTIONS (1)] →
[BEEP] → [OFF].
[Poor picture]
2. Projecting an Image (Basic Operation)
[Adjusted picture]
20
Increase volume
Decrease volume