Page 1
Washer dryer WVG..GB Instruction Manual and Installation Instructions...
Page 2
Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Selecting the programme/Switching on Intended use.
Intended use Drainage hose on the siphon blocked Intended use ......41 Filter in the water inlet hose blocked 42 This appliance is intended for private ■...
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
Safety instructions The mains plug and the Warning ■ protective contact socket Risk of poisoning! must match and the earthing Detergents and care products system must be correctly may result in poisoning if installed. consumed. The installation must have an If accidentally swallowed, seek ■...
Page 7
Safety instructions Warning Warning Risk of fire/material damage/ Risk of injury! damage to the appliance! The appliance is very heavy. ■ The use of extension cords or Lifting it may result in injury. power strips may result in fire Do not lift the appliance on due to overheating or short your own.
Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
Page 9
Safety instructions If there is coal dust or flour in Warning Ri s k of expl o si o ns/fi r e! ■ the air around the appliance, Risk of injury! this may cause an explosion. If you support your weight/sit ■...
Safety instructions Caution! Cleaning/Maintenance Material damage/damage to Warning the appliance Risk of death! If the amount of laundry in ■ The appliance is powered by the appliance exceeds its electricity. There is a risk of maximum load capacity, it electric shock if you come into may not be able to operate contact with live components.
Protection of the environment Warning Protection of the Risk of electric shock/material environment damage/damage to the appliance! P ackaging/old appliance If moisture penetrates the P r o t e c t i o n o f t h e e n v i r o n m e n t appliance, this may cause it to short circuit.
Positioning and connecting @ Water drain hose Positioning and H Elbow for securing the water connecting drain hose* P Water supply hose on standard/ Aqua-Secure models I ncluded with the appliance P o s i t i o n i n g a n d c o n n e c t i n g depending on the model Check the machine for transport Note:...
Positioning and connecting Installing the appliance in a Caution! Water damage kitchenette The connection points for the water supply hose and water drain hose are Warning under high water pressure. To prevent Danger of death! leaks and water damage, you must There is a risk of electric shock if you follow the instructions in this section.
Positioning and connecting Keep the screws and sleeves in Hose and cable lengths Note: a safe place. Connection on left side Take the hoses out of the holders. Connection on right side Unscrew and remove all four transportation securing bolts with a wrench (WAF 13).
Positioning and connecting Water inlet Connection Connect the water supply hose to the Warning tap (26.4 mm = ¾") and to the Danger of death! appliance (not necessary for Aqua-Stop There is a risk of electric shock if you models as this is permanently installed): touch live components.
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
Positioning and connecting Alignment Electrical connection Loosen the lock nut in a clockwise Electrical safety direction with a wrench. Check the alignment of the washer Warning dryer with a spirit level and, if Risk of electric shock! required, correct. Adjust the height Risk of death if live parts are touched.
Positioning and connecting Before washing/drying for the Transportation first time Preparatory work Turn off the tap. The washer dryer was inspected Release the water pressure in the thoroughly before leaving the factory. To supply hose. remove any residual test water, run the Filter in the water inlet hose blocked Drum CleanÛ...
The main points in brief The main points in brief T h e m a i n p o i n t s i n b r i e f Plug into the mains. Open the washer Select the washing/ Max.
Getting to know your appliance Getting to know your appliance W asher dryer G e t t i n g t o k n o w y o u r a p p l i a n c e Detergent drawer Operating/display panel Door with handle 9S Open the door...
Getting to know your appliance Control panel Change the default settings for the selected programme and select additional functions: ( Select a programme. Can be rotated in either direction. To switch off the washer dryer, set the programme selector to Off. 0 Select buttons for changing default settings.~ Page 36 Select buttons for additional...
Getting to know your appliance Display panel Displays for the programme (: Temperature for washing — (cold) – 90° Temperature in °C programme 0: Programme information 1:50* Programme duration after programme selection in h:min (hours:minutes) Finish in time in h (h=hour) 1 –...
Page 23
Getting to know your appliance @: Programme information E lights up On if childproof lock has been activated ~ Page 30 and additional function symbols E flashes The childproof lock is actived, and if the pro- gramme selector has been adjusted or the buttons have been pressed Õ...
Laundry The numbers in the symbols Note: Laundry indicate the maximum washing temperature that may be used. P reparing laundry for washing L a u n d r y Suitable for normal washing Sorting laundry according to: process; Sort your laundry according to the care e.g.
Laundry Empty any pockets. Remove any The following textiles must not be dried: ■ foreign objects. b = care symbol “Do not dry” ■ Wool or textiles containing wool. ■ Delicates (silk, synthetic curtains). ■ Textiles which contain foam rubber ■...
Operating the appliance Selecting the programme/ Operating the Switching on the appliance appliance Note: P reparing the washer dryer If you have activated the childproof lock, O p e r a t i n g t h e a p p l i a n c e you must deactivate it before you can The washer dryer was tested before set a programme.
Operating the appliance Adjusting the drying Notes Options can be selected, deselected programme ■ or changed depending on the progress of the programme. Note: The buttons are sensitive, they only If an individual drying programme or ■ need to be touched gently. If the washing and drying without interruption button °C Temp., 0 rpm, is selected, you can change the default...
Operating the appliance Loading the laundry Dosing and adding detergent and care product Warning Danger of death! Caution! Laundry items pretreated with solvent- Damage to the appliance based detergents, e.g. stain remover/ Detergents and agents for the petroleum ether, may cause an pretreatment of laundry (e.g.
Operating the appliance Pour in detergent and/or cleaning Measuring aid* for liquid detergent product. *depending on the model Position the measuring aid for measuring the correct amount of liquid detergent: Pull out the detergent drawer. Press down the insert and fully remove the drawer.
Operating the appliance Childproof lock Notes If there is a high water level, high ■ You can secure the washer dryer to temperature or if the drum is prevent the set functions from being rotating, the door remains locked changed inadvertently. To do this, for safety reasons and reloading is activate the childproof lock when the not possible.
Operating the appliance For drying programmes: After washing/drying Select Intensive Dry or Gentle Dry. Open the door and remove the Touch Š Dry button, and set drying laundry. time to 20 minutes. Turn the programme selector to Off. Touch A Start/Reload button. The appliance is switched off.
Overview of programmes Overview of programmes P rogramme on the O v e r v i e w o f p r o g r a m m e s programme selector Programme/Type of washing Options/Information Name of the programme maximum load according to EN50229 Brief explanation of the programme and which textiles it is suitable...
Page 33
Overview of programmes Programme/Type of washing Options/Information ; Allergy+ max. 6.5(5.0)* kg/4.0 kg Hardwearing textiles made of cotton or linen. — (cold) – 60 °C Notes – – – –, 400 – 1500 rpm Especially suitable for increased hygienic demands or particu- ■...
Page 34
Overview of programmes Programme/Type of washing Options/Information Wool W ã max. 2.0 kg/ – Hand and machine-washable fabrics made of wool or wool blend; — (cold) – 40 °C particularly gentle wash programme to prevent shrinkage of laun- – – – –, 0 – 800 rpm dry, with longer programme breaks (soaking garments in the deter- gent solution).
Changing programme default settings Starching Changing programme default settings The laundry should not be Note: treated with fabric softener. Y ou can change the default settings for Liquid starch can be used in all wash C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
Changing programme default settings Before the programme starts, the end of Notes the programme can be preselected in Programme selection in Intensive ■ hourly increments up to a maximum of Dry or Gentle Dry position to select 24h. an individual drying programme. Overview of programmes When the programme has started, ~ Page 32...
Selecting additional functions Selecting additional functions Y ou can select your desired additional S e l e c t i n g a d d i t i o n a l f u n c t i o n s functions by touching the respective buttons.
Setting the signal Setting the signal S e t t i n g t h e s i g n a l Setting signal volume Activate setting mode for signal volume Turn to Off 1 step clockwise Press A Start/ 1 step clockwise Release Reload and hold and...
Cleaning and maintenance Descaling Cleaning and Not required if detergent dosed maintenance correctly. However, if this does occur, follow the instructions of the descaling Warning agent manufacturer. Suitable descalers C l e a n i n g a n d m a i n t e n a n c e Risk of electric shock! can be purchased on our website or Danger of death if live parts are...
Cleaning and maintenance Drain pump blocked Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be scalded. Place the service flap back on, lock Allow the water to cool down.
Faults and what to do about them Filter in the water inlet hose Faults and what to do blocked about them Warning E mergency release, e.g. if a Danger of death! F a u l t s a n d w h a t t o d o a b o u t t h e m power failure occurs Do not immerse the Aqua-Stop safety device in water (it contains an electric...
Faults and what to do about them Information on the display panel Information Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ ■ Close the door, continue the programme with A Start/Reload button or select Drain [ programme.
Page 44
Faults and what to do about them Faults Cause/Remedy Detergent solution is not - - - - (Rinse stop = without final drain/spin) selected? ■ drained. Clean the drain pump. ~ Page 41 ■ Clean outlet pipe and/or drainage hose. ■...
Page 45
Faults and what to do about them Faults Cause/Remedy Water inlet noise during The washer dryer uses water condensation technology, water is constantly the drying phase. needed to dry the laundry. Therefore the tap must be on all the time, till the end of drying phase.
Customer service Customer service Technical specifications I f you cannot correct the fault yourself, C u s t o m e r s e r v i c e see section, Faults and what to do D imensions: about them ~ Page 43 T e c h n i c a l s p e c i f i c a t i o n s 850 x 600 x 590 mm Please contact our customer service.
Consumption values Consumption values C o n s u m p t i o n v a l u e s Programme Option Load Energy Water Programme (kg) consumption * Consumption * duration * (kWh) (liter) (hours) i Cottons 20 °C 0,30 i Cottons 40 °C 1,08...
Page 48
Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.