Table of Contents
Advertisement
Fault
"E:35 / -10"
lights up.
flashes.
"H:95" lights up altern-
ately with End.
Cause and troubleshooting
The filter in the water inflow is blocked.
Clean the water inflow filter.
▶
The tap is turned off.
Turn on the tap.
▶
The water inlet hose is kinked or jammed.
Ensure that the water inlet hose is not kinked or
▶
jammed.
Water level measurement system is defective.
Call the after-sales service.
▶
→ "Customer Service", Page 48
There is water in the base trough.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 48
The appliance is leaking.
Turn off the water tap.
▶
Call the after-sales service.
▶
→ "Customer Service", Page 48
The temperature is too high.
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 32
▶
Water level is too high.
Select a suitable programme for draining.
▶
→ "Programmes", Page 26
Laundry is caught in the door.
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start/ Reload to start the programme.
4.
Door is not closed.
Close the door.
1.
Press Start/ Reload to start the programme.
2.
Drum cleaning is required.
→ "Cleaning the drum", Page 33
▶
The water pressure is low.
See
▶
→ "
", Page 39
Troubleshooting en
39
Advertisement
Table of Contents
