Canon TS9150 Online Manual page 299

7. Select Wireless Direct active/inactive.
8. Select ON.
The confirmation screen asking if you display the password information appears.
9. Select Yes or No.
The list of Wireless Direct settings is displayed.
The device detects the printer by the identifier (SSID).
Note
• You can check the following.
• SSID
• Security setting
• Password
• Printer's name which appears on a Wi-Fi Direct compatible device
The password is required when connecting a device to the printer. Depending on the device
you are using, no password is required.
When you connect a Wi-Fi Direct compatible device to the printer, select the device name
displayed on the touch screen from your device.
• The identifier (SSID) and the security setting are specified automatically. To update them, see
below.
Changing Wireless Direct Setting
10. Select OK.
The Wireless Direct is enabled and a device can be connected to the printer wirelessly.
Connecting the Device to the Printer
1. Turn on wireless communication on your device.
Enable "Wi-Fi" on your device's "Setting" menu.
For more on turning on wireless communication, see your device's instruction manual.
2. Select "DIRECT-XXXX-TS9100series" ("X" represents alphanumeric characters) from
list displayed on device.
Note
• If "DIRECT-XXXX-TS9100series" does not appear on the list, Wireless Direct is not enabled.
See Enabling Wireless Direct of Printer
3. Enter password.
to enable Wireless Direct.
299