Ec Declaration Of Conformity; Ec Konformitätserklärung - ZENEC NC3131D User Manual

EC DECLARATION OF CONFORMITY

EC DECLARATION OF CONFORMITY
Hereby declares under our sole responsibilily that the products:
Description of object:
Name of object:
Type name of objects:
are conform to the essential requirements of the:
European Vehicle EMC Directive 72/245/EEC, including all modifications up to 2009/19/EC dated 12.03.2009 including proof
for complience with following standards: CISPR25 (2
Radio and Telecommunications Terminal equipment Directive, R&TTE 1999/5/EC
The following harmonized European Standards have been applied:
ECE R10 V02
EN 55022:2006
EN 55024:1998 + A1:2001 + A2:2003
EN 61000-3-2:2006
EN 61000-3-3:1995 + A1:2001 + A2:2005 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage
EN 301 489
ISO 7637-2:2004
EN 60950-1:2006
2002/96/EC
2002/95/EC (2008/385/EC)
2011/6 5/EC
Declared by:
Andre Grossenbacher, Chief Technology Officer
Bad Zurzach
(Place)
Roland Braendli, Managing Director
Bad Zurzach
(Place)
Page 1 of 1
In-Car Navigation Device
ZENEC E>GO
ZE-NC2011D, ZE-NC2051D, ZE-NC2041D, ZE-NC3131D,
ZE-NC3141D, ZE-3811D, ZE-NC3711D, ZE-NC5011D,
and identical/similar devices based on C9D hardware platform
ISO 11452-2 (2
Type approval of an electrical / electronic sub-assembly under Regulation Nr. 10
Class B Information Technology equipment - Emission Limits and Methods
Information Technology equipment Immunity Limits and Methods
Class D Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase)
fluctuations and flicker in low-voltage supply systems for equipment with rated current
<= 16 A
EMC and Radio Spectrum Matters (ERM)
Part 1 V1.5.1 Common Technical Requirements
Part 17 V1.2.1 Specific Conditions for 2,4 GHz Wideband Transmission Systems and 5GHz
high Performance RLAN equipment
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical
transient conduction along supply lines only
Information technology equipment – Safety – Part 1: General requirements
(IEC 60950-1:2005, modified)
Restriction of the use of certain hazardous substances in electrical and electronic
equipment (RoHS), Product is in accordance with the European WEEE Directive,
RoHS Directive and the German ElektroG.
RoHS2 Directive, revised and extended by Annex II.
(Date)
(Date)
11.04.2012 RevA
nd edition 2002)
nd edition 2004)
(Signature)
(Signature)
102
ZENEC by
ACR Braendli + Voegeli AG
Bohrturmweg 1
5330 Bad Zurzach
Switzerland