Kodak AZ901BK User Manual page 38

1. Rotate the mode dial to
enter the Wi-Fi selection interface.
2. Press the [ ]/[
select and set options.
Wi-Fi Mode
Settings Station
In AP mode, the camera will act
as an access point enabling another
Wi-Fi device to connect to it.
•
「 Settings」：
Customize the Wi-Fi settings for
the camera system.
•
「Station」：
Use the Station Mode to connect
to a "Personal Hotspot" created by
your mobile device.
• 「AP Mode」：
In AP mode, the camera will act as
an access point enabling another
Wi-Fi device to connect to it.
Rotate the mode dial to disconnect.
and then
] button to
AP mode
AP Mode
This camera may connect with your smart
device through Wi-Fi.
Settings of Camera:
1. Select and press the
enter the setting interface.
2. Press the [
to select options to be adjusted, and
press the button to enter the option
setting interface.
AP mode
Setting pre-connected device for the
following serial number:
SSID: PIXPRO AZ901_XXXX
WPA2-PSK: XXXXXXXX
Refresh
• Refresh: Create a new WPA2 PSK
password.
• Back: Back to previous page.
button to
]/[ ] button
Back
37