Network - D-Link COVR-P2502/E User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the
extender and to configure the DHCP settings.
In the Settings menu on the bar on the top of the page, click Network. Click
Advanced Settings... to expand the list and see all of the options.
Network Settings
Management Enter a management link. This link is used to access the extender's web
Link:
interface. If changed, you will need to enter this new link into a web
browser to access the configuration utility. The default management
link is http://covr.local./
Advanced Settings
IPv4
My Internet Select either Dynamic IP (DHCP) if you want the extender to
Connection is: automatically receive its network information from the router
(recommended), or select Static to manually configure the extender's
network settings.
If you selected Static, enter a valid IP address.
IP Address:
If you selected Static, enter a valid subnet mask.
Subnet Mask:
If you selected Static, enter a valid gateway IP address.
Gateway Address:
If you selected Static, enter a primary DNS address.
Primary DNS:
Secondary DNS: If you selected Static, enter a secondary DNS address.
D-Link COVR-P2502 User Manual

Network

24