Advertisement
● 012d: Rotary2
This type provides modified response for the rotary speaker, with the low end boosted further.
This effect is a descendant of the Roland VK Series' built-in rotary speaker.
No
Parameter
Value
1
Speed #1
0–1
Slow, Fast
2
Brake #2
0–1
Off, On
Woofer Slow
3
1–127
0.05–10.00 Hz
Speed
Woofer Fast
4
1–127
0.05–10.00 Hz
Speed
Woofer Trans
5
0–127
0–127
Up
Woofer Trans
6
0–127
0–127
Down
7
Woofer Level
0–127
0–127
Tweeter Slow
8
1–127
0.05–10.00 Hz
Speed
Tweeter Fast
9
1–127
0.05–10.00 Hz
Speed
Tweeter Trans
10
0–127
0–127
Up
Tweeter Trans
11
0–127
0–127
Down
12
Tweeter Level
0–127
0–127
13
Spread
0–10
0–10
14
Low Gain
0–30
-15–+15 dB
15
High Gain
0–30
-15–+15 dB
16
Level
0–127
0–127
Description
Rotational speed of the rotating
speaker
Switches the rotation of the rotary
speaker.
When this is turned on, the rotation will
gradually stop. When it is turned off,
the rotation will gradually resume.
Low-speed rotation speed of the
woofer
High-speed rotation speed of the
woofer
Adjusts the rate at which the woofer
rotation speeds up when the rotation is
switched from Slow to Fast.
Adjusts the rate at which the woofer
rotation speeds up when the rotation is
switched from Fast to Slow.
Volume of the woofer
Settings of the tweeter
The parameters are the same as for the
woofer.
Sets the rotary speaker stereo image.
The higher the value set, the wider the
sound is spread out.
Gain of the low range
Gain of the high range
Output Level
● 0300: Rotary Multi
This is an effect combining the VK series internal effect with an organ effect with the same
features.
It comprises vibrato/chorus, overdrive, and rotary effects.
No
Parameter
Value
1
Vib/Cho Switch
0–1
Off, On
V-1, V-2, V-3,
2
Vib/Cho Type
0–5
C-1, C-2, C-3
3
Vib/Cho Vintage
0–2
'50, '60, '70
4
Vib/Cho Level
0–127
0–127
5
OD Switch
0–1
Off, On
6
OD Drive #2
0–127
0–127
7
OD Level
0–127
0–127
8
Rotary Switch
0–1
Off, On
9
Rotary Speed #1
0–1
Slow, Fast
10
R-Wf Slow Sp
1–127
0.05–10.00 Hz
11
R-Wf Fast Sp
1–127
0.05–10.00 Hz
12
R-Wf Accel
0–15
0–15
13
R-Wf Level
0–127
0–127
14
R-Tw Slow Sp
1–127
0.05–10.00 Hz
15
R-Tw Fast Sp
1–127
0.05–10.00 Hz
16
R-Tw Accel
0–15
0–15
17
R-Tw Level
0–127
0–127
18
Rotary Separat
0–127
0–127
19
Rotary Level
0–127
0–127
● 015b: Stereo Delay1
This is a stereo delay.
No
Parameter
Value
1
Delay Left Mode
0–1
ms, note
2
Delay Left
0–127
1–1270 ms
3
Delay Left
0–21
note
Delay Right
4
0–1
ms, note
Mode
5
Delay Right
0–127
1–1270 ms
6
Delay Right
0–21
note
7
Phase Left
0–1
Normal,
Inverse
8
Phase Right
0–1
9
Feedback Mode
0–1
Normal, Cross
10
Feedback #1
49–89
0–+80%
200–8000 Hz,
11
HF Damp
0–17
Bypass
12
Low Gain
0–30
-15–+15 dB
13
High Gain
0–30
-15–+15 dB
D100:0W–
14
Balance #2
0–100
D0:100W
15
Level
0–127
0–127
MIDI Implementation
Description
Switches the vibrato and chorus effects
Vibrato and chorus effect types
V-1, V-2, V-3: Adds a wavering
(vibrato) that is created by changes in
the pitch.The effect deepens as the
value is increased
C-1, C-2, C-3: Adds a fullness and
breadth (chorus) to the sound.The
effect deepens as the value is
increased.
This reproduces the subtle differences
in the vibrato and chorus effects in
organs built in different years.
Vibrato/chorus effect volume
Switches the overdrive effect
Amount of distortion
Overdrive effect volume
Switches the rotary effect
Low- and high-frequency rotation
speeds (Rate)
Slow: (Slow Rate)
Fast: (Fast Rate)
Rate with low-frequency rotor set to
Slow rate
Rate with low-frequency rotor set to
Fast rate
Speed at which the low-frequency
rotor's rotation rate changes when the
rotation speed is switched
Low-frequency rotor volume
High-frequency rotor setting
This parameter is the same as that for
the low-frequency rotor.
Amount of breadth in the sound
Output volume
Description
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay sound
is heard. (Hz)
Adjusts the time until the delay sound
is heard. (note)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the time until the delay sound
is heard. (Hz)
Adjusts the time until the delay sound
is heard. (note)
Phase of the delay sound
Selects the way in which delay sound is
fed back into the effect. (See the figures
above.)
Adjusts the amount of the delay sound
that's fed back into the effect.
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don't want to filter out any
high frequencies, set this parameter to
Bypass.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the delay sound (W)
Output level
23
Advertisement
