Using Control Handle - Boss Industrial 3PT34T25 Owner's Manual

USING CONTROL HANDLE

The control handle has three positions.
• FORWARD — To split wood. Move the control handle to the FORWARD position to move wedge toward the log to split.
NOTE: The control handle will return to the NEUTRAL position as soon as the handle is released (FORWARD
position only), and the wedge stops moving forward.
• NEUTRAL — To stop wedge. Release the control handle or move the lever to the NEUTRAL position to stop the wedge
movement.
• REVERSE — To return the wedge. Move the control handle to the REVERSE position, the wedge returns automatically
toward the cylinder. When the wedge is fully retracted, the control handle returns to the NEUTRAL position automatically.
Do not hold the handle in the REVERSE position when fully retracted.
NOTE: The REVERSE position may also be moved back to the NEUTRAL position manually, if necessary.
WARNING! If the control handle on your log splitter is not functioning properly, STOP USE IMMEDIATELY
and contact an authorized service dealer.
WARNING! Do not attempt to service, repair or replace control valve. Contact an authorized service dealer.
WARNING! Do not attempt to adjust or modify the control valve or the hydraulic system from its original
settings or manufacturer in any way.
Page 16
OPERATION INSTRUCTIONS
See FIGURE 12.
Forward
Neutral
Reverse
(FIGURE12)
Page 19