Model
Engine
Tractor Requirements
Cylinder (Bore x Stroke)
Maximum Splitting Force
Maximum Log Length
Wedge Height
Forward
Cycle Time
Reverse
Height
(Horizontal / Vertical Position)
Length
(Horizontal / Vertical Position)
Width
Net Weight
*Splitting force is determined by Splitter cylinder size and Tractor PSI. Cycle time depends on
Splitter cylinder size and GPM that Tractor produces. Mechanical and environmental conditions
could also influence the splitting force and cycle time.
WARNING! Before purchasing this 3-Point Hitch log splitter, make sure your Tractor ideally
Produces
DO NOT exceed 3700 PSI. The tractor pressure ratings can be found at the tractor
manufacturer's manual. Exceeding the recommended pressure rating will damage the
equipment, and void the warranty.
Page 24
SPECIFICATIONS
3PT22T25
Tractor dependent
CAT 1 or CAT 2
4 in. x 24 in.
22 Tons*
25 in.
8 in.
7 Seconds*
4 Seconds*
41.8 / 72.3 in.
72.3 / 54.6 in.
24 in.
442 lbs
the hydraulic flow of 8 – 16 GPM at the pressure ratings of 2000 to 3200 PSI.
3PT28T25
Tractor dependent
CAT 1 or CAT 2
4.5 in. x 24 in.
28 Tons*
25 in.
8 in.
8 Seconds*
5 Seconds*
41.8 / 72.3 in.
72.3 / 54.6 in.
24 in.
458 lbs
3PT34T25
Tractor dependent
CAT 1 or CAT 2
4.5 in. x 24 in.
34 Tons*
25 in.
8 in.
8 Seconds*
5 Seconds*
41.8 / 72.3 in.
72.3 / 54.6 in.
24 in.
496 lbs
Page 21