OPERATION INSTRUCTIONS
USING CONTROL HANDLE
The control handle has three positions.
• FORWARD — To split wood in Forward direction. Move the control handle to the FORWARD position to move wedge
forward to split the log.
• NEUTRAL — To stop wedge.
and the wedge stops moving at any point during splitting.
• REVERSE — To split another wood in Reverse direction. Move the control handle to the REVERSE position to move the
wedge backward to split another log.
NOTE: The control handle will return to the NEUTRAL position as soon as the handle is released, and the wedge stops
moving backward..
WARNING! If the control handle on your log splitter is not functioning properly, STOP USE IMMEDIATELY
and contact an authorized service dealer.
WARNING! Do not attempt to service, repair or replace control valve. Contact an authorized service dealer.
WARNING! Do not attempt to adjust or modify the control valve or the hydraulic system from its original
settings or manufacturer in any way.
Page 14
See FIGURE 10.
Neutral
Forward
The control handle will return to the NEUTRAL position as soon as the handle is released,
(FIGURE10)
Reverse
Page 17