Installation - AEG HK856600XB User Manual

20 www.aeg.com
free of charge, also during the warranty
period. The instructions about the

9. INSTALLATION

WARNING!
Refer to Safety chapters.
9.1 Before the installation
Before you install the hob, write down
the information bellow from the rating
plate. The rating plate is on the bottom
of the hob.
Serial number ...........................
9.2 Built-in hobs
Only use the built-in hobs after you
assemble the hob into correct built-in
9.4 Assembly
min.
500mm
min.
50mm
min.
2mm
Service Centre and conditions of
guarantee are in the guarantee booklet.
units and work surfaces that align to the
standards.
9.3 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable
use the following (or higher) mains
cable type: H05V2V2-F T min 90°C.
Speak to your local Service Centre.