Chapter 9. Use The Lcd Panel - QNAP TS-219P+ User Manual

Chapter 9. Use the LCD Panel
This feature is only provided by the NAS models with LCD panels. Please visit
http://www.qnap.com
The NAS provides a handy LCD panel for users to perform disk configuration and view the
system information.
When the NAS has started up, the server name and IP address will be shown.
N A S 5 F 4
1 6 9 . 2 5
For the first time installation, the LCD panel shows the number of hard drives detected and
the IP address. Configure the hard drives.
Number of hard
drives detected
1
2
3
4 or above
*Press the "Select" button to choose the option, and press the "Enter" button to confirm.
for details.
D E 3
4 . 1 0 0
Default disk
configuration
Single
RAID 1
RAID 5
RAID 5
. 1 0 0
Available disk configuration options*
Single -> JBOD ->RAID 0 -> RAID 1
Single -> JBOD -> RAID 0 -> RAID 5
Single ->JBOD -> RAID 0 -> RAID 5
43
Single
-> RAID 6