To disconnect the Bluetooth-enabled device:
Press and hold PAIRING for three seconds.
•
•
Deactivate Bluetooth on your device; or
•
Move the device beyond the
communication range.
To clear Bluetooth pairing history:
•
Press and hold
for 8 to 10 seconds.
Play a disc
1
Press SOURCE repeatedly to select the
disc source.
2
Press to open the disc compartment.
3
Load a disc onto the disc tray, with the
printed side facing up.
4
Press again to close the disc
compartment.
» Play starts automatically.
•
To pause/resume play, press
•
To stop play, press .
•
To select another track, press
•
To select an album, press
•
To search within a track, press and
hold
/
normal play.
12
EN
on the remote control
DISC
.
/
/ .
, then release to resume
Play from USB
Note
•
Make sure that the USB device contains playable audio
contents in supported formats. The NTFS file format is
not supported.
•
A USB hub is not supported.
•
Some card readers may not be supported.
1
Plug the USB device into the
the main unit.
2
Press SOURCErepeatedly to select the
USB source.
3
Press
4
Press
5
If play does not start automatically, press
.
•
To pause/resume play, press
•
To stop play, press .
.
•
To search within an audio file, press
and hold
resume normal play.
USB
/
to select a folder.
/
to select an audio file.
/
, then release to
socket on
.