Operating The Dryer - LG TROMM DLGX7188RM User's Manual & Installation Instructions

H O W TO U S E

OPERATING THE DRYER

Once you have loaded the dryer:
1 Press the ON/OFF button to turn on the
2 Turn the cycle selector knob to the desired
3
If you would like to change the settings
ULTRA DELICATES
for that cycle, press the option button(s)
MANUAL DRY
SPEED DRY
MORE
to display additional settings for that option.
TIME
Press the button again to cycle through
FRESHEN UP
the settings until the desired setting is
highlighted.
AIR DRY
DRY LEVEL
NOTE: To protect your garments, not every
dry level, temperature, or option is available
with every cycle.
4
Select any additional cycle options, such

dryer. The lights around the cycle
selector knob will illuminate.
cycle. The display will show
the preset Dry Level,
Temperature, Time, and
Option settings for that cycle.
SENSOR DRY
LESS
0:20
20%
EST. TIME
TIME
REMAINING
NORMAL
NORMAL MEDIUM OFF MID
HIGH
TEMP . CONTROL TIME DRY BEEPER
as REDUCE STATIC, EASY
IRON, CUSTOM PROGRAM,
WRINKLE CARE (*RACK DRY),
and ANTI BACTERIAL (*DAMP
DRY BEEP), by pressing the
button for that option.
Press the START/PAUSE button to begin the
5
cycle. The display will change,
and the dryer will display the
estimated (SENSOR DRY) or set
time (MANUAL DRY) remaining
and start tumbling. To pause the cycle at any
time, open the dryer door or press PAUSE.
To resume the cycle where it was stopped,
press START/PAUSE again.
NOTE: If the dryer has been stopped for
more than 8 minutes, the dryer will turn
off automatically.
6 When the load is finished, the beeper (if set)
will sound. If you have set the WRINKLE
CARE option, the dryer will tumble the load
periodically for up to 3 hours.
To prevent wrinkling, remove items from the
dryer immediately after the end of the cycle.
Always clean the lint filter after every cycle.
7
To clean, pull the lint filter straight up and
roll any lint off the filter with your fingers.
Do not rinse or wash the filter to remove lint.
Push the lint filter firmly back into place.