Acer DM431K User Manual page 28

Hide thumbs Also See for DM431K:
Table of Contents

Advertisement

HDMI /DP model
Problem
No picture visible Blue
Unstable picture
Abnormal picture Image is missing,
Note: Acer monitor is purposed for video and visual display of information obtained from
electronic devices.
LED status
Off
Orange
off-center, too
large or too small
on the screen.
Using the OSD, adjust brightness and contrast to
maximum or reset to their default settings.
Check the power switch.
Check if the power cord is properly connected to
the monitor.
Check if the video signal cable is properly
connected at the back of monitor.
Check if the computer system is switched on and
in power saving/standby mode.
Check if the specification of graphics adapter and
monitor is in compliance which may be causing
the input signal frequency mismatch.
Check the display setting on your system. In
case of a missing image, please select another
resolution or vertical refresh rate.
Wait for a few seconds after adjusting the size of
the image before changing or disconnecting the
signal cable or switching off the monitor.
17
Remedy

Advertisement

Table of Contents
loading

Table of Contents