Table of Contents
Advertisement
System setting
1. Press the
key to bring up the OSD.
2. Using the
/
you wish to adjust.
3. Use the / keys to adjust the sliding scales.
4. The Performance menu can be used to adjust the Input ,Auto Source,DP Format,Wide
Mode,PIP/PBP,Hot Key Assignment and other important settings.
5. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
6.USB upgrade menu allows user to upgrade Firmware. The Firmware name must be "
ACER_MST9U3_DM431K.bin" and put in USB root directory.
Note: Recommended engineering staff to assist.
Product the Information setting
Picture
Color
Audio
Performance
OSD
System
Information
1 Press the
key to bring up the OSD.
2 Using the
/
LCD monitor will show up for current input.
3 The Information menu can be used to adjust the IReset All Settings and Exit settings.
Input
Picture
Color
Auto Source
DP Format
Audio
Wide Mode
Performance
PIP/PBP
OSD
Hot Key Assignment
System
DDC/CI
Information
HDMI Black Level
Quick Start Mode
USB upgrade
Move
keys, select
System from the OSD . Then navigate to the feature
Mode - Standard
Main Source
HDMI 1
Resolution
3840x2160.
H/V Frequency
H: 89 KHz, V: 60 Hz
Mode
Normal
Series Number
MMTA700001701000013E00
Reset All Settings
Exit
Move
keys, select
Information from the OSD . The basic information of
Mode - Standard
Enter
Enter
15
HDMI 1
on
DP12
Full
On
Normal
off
Enter
Exit
Advertisement
Table of Contents
