Hitachi RA-08MDF Operation And Installation Manual page 6

HOW TO SET THE ON TIMER
Press the (ON TIMER) button, and the display changes as shown below.
Mode
1 hr
4
ON TIMER
Operation will start for setting temperature at setting time (The starting time may
■
different depend on the room temperature and set temperature).
HOW TO REPLACE THE BATTERIES IN THE REMOTE CONTROLLER
When using the remote controller, if there is no response from the air conditioner or the remote controller display is
dim, please try to replace the batteries.
Indication
2 hrs 3 hrs
4 4 4
Cancel ON TIMER
10 hrs 11 hrs 12 hrs
4 4
1
1
Remove the cover as shown in the fi gure and take out
the old batteries.
2
Install the new batteries.
The terminal of the batteries should match the marks in
the case.
CAUTION
!
1. Do not use new and old batteries, or different kinds of
batteries together.
2. Take out the batteries when you do not use the remote
controller for 2 months or longer.
3. Use high quality and high performance AAA batteries to avoid
short operating life and electrolyte leakages
– 4 –
< >
IA0000: A