Mounting On A Table - LG LT74 Series Owner's Manual

Mounting on a table

1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
1 0 c m
2 Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources
y
of heat, as this may result in fire or other
damage.
Attaching the TV to a table
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
32/37/42/47LT74**)
4-Screws
(not provided as parts of the product)
Screws: M5 x L (*L: Table depth + 8-10 mm)
ex) Table depth: 15 mm, Screw: M5 x 25
10 cm
1 0 c m
1 0 c m
Stand
Table
ASSEMBLING AND PREPARING
Securing the TV to a table
(Only 32/37/42/47LT64**, 32/37/42/47LT65**,
32/37/42/47LT74**, 32/42LS34**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
WARNING
To prevent TV from falling over, the TV
y
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
Adjusting the angle of the TV to suit view
Swivel 90 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only LT64**, LT65**, LT74**)
90
(Only LS64**)
CAUTION
When adjusting the angle of the product,
y
watch out for your fingers.
» Personal injury may occur if hands or
fingers are pinched. If the product is tilted
too much, it may fall, causing damage or
injury.
15
90