Note
•
If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to the
caller directly.
•
If the memory is full, the answering machine switches
to [Answer only] automatically. Delete old messages to
receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
•
To start/stop listening, press
•
To adjust the volume, press
•
To play the previous message/replay the
current message, press .
•
To play the next message, press
•
To delete the current message, press .
Note
•
No deleted messages can be recovered.
From the handset
•
If there are new messages, press
to listen. If there is no new message, press
, then MENU/OK to listen to old
/
messages.
Press MENU/OK > [Answ. Machine] >
•
[Play], then press MENU/OK to confirm.
» New messages start playing. Old
messages start playing if there is no
new message.
Press REDIAL/C to stop listening.
•
Press MENU/OK to enter the options
•
menu.
•
Press
/
to increase/decrease the
volume.
Delete an incoming message
From the base
Press
when you listen to the message.
» The current message is deleted.
26
EN
.
/
.
.
/
From the handset
1
When you listen to the message, press
MENU/OK to enter the options menu.
2
Select [Delete], then press MENU/OK to
confirm.
» The current message is deleted.
Delete all old incoming messages
Press and hold
on the base station in standby
mode.
» All old messages are permanently
deleted.
From the handset
1
Press
/
or MENU/OK > [Answ.
Machine]
2
Select [Delete all], then press MENU/OK
to confirm.
» A confirmation request is displayed on
the handset.
3
Press MENU/OK to confirm.
» All old messages are permanently
deleted.
Note
•
You can only delete the read messages. No deleted
messages can be recovered.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
or MENU/OK > [Answ.
Press
/
Machine]
2
Select [Ring delay], then press MENU/OK
to confirm.
3
Select a new setting, then press MENU/
OK to confirm.
» The setting is saved.