Table of Contents
Advertisement
Digital Photo Frame
Setup
Setup allows you to configure the basic Properties of the device. Select
Brightness
Orientation
Photo Aspect Ratio
Video Aspect Ratio
Alarm
Set up the screen's brightness. It is possible to adjust from 1 to 5.
Set the display direction of the product.
(* This product reads the photo information and the orientation value and rotates the photo
accordingly.)
• Auto
Sensor automatically shows in rotation by perceiving the product direction.
• Landscape
Shows at breadth.
• Portrait
Shows at length.
Adjust the aspect ratio of the screen.
• Width Custom
It expands the photo size horizontally to fill the screen.
It expands the photo size vertically to fill the screen.
• Height Custom
• Original
It shows the picture in original size.
• Full1
It shows the picture fit to the size of the screen regardless of the ratio
of the picture.
• Full2
It shows the picture fit to the size of the screen maintaining the ratio of
the picture. The outer edges may be cut off depending on the size of
the picture.
Adjust video aspect ratio.
• Original
It shows by automatically adjusting the screen ratio.
It shows as the ratio of 4:3.
• 4:3
It shows as the ratio of 16:9.
• 16:9
You can set up the alarm. Set up the time, repetition setup, sound, and so on.
Alarm can be used when power is on or in power saving mode.
Setup on the Home Menu.
24
Advertisement
Table of Contents
