Table of Contents
Advertisement
Caution
Do not put your hands into the lamp
replacement slot except in the depressions,
and do not allow any liquid or other objects
into the slot to avoid electrical shock or
fire.
4
Insert the new lamp all the way in until
it is securely in place (a). Tighten the
3 screws (b).
1
2
Notes
• Be careful not to touch the glass surface
of the lamp and a inside conductor.
• The power will not turn on if the lamp is
not secured properly.
5
Close the lamp cover and tighten the
1 screw.
2
1
2
6
Connect the AC power cord to a wall
outlet and turn on the projector.
7
Reset the lamp timer for
the next replacement time.
Select "Lamp Timer Reset" on the
Function menu then press the ENTER
key. When a message appears, select
"Yes" to reset the lamp timer (page 23).
Caution
For the customers in the
U.S.A. and Canada
Lamp contains
mercury. Dispose according
to applicable local, state/
province and federal laws.
For additional information,
see www.sony.com/mercury
Replacing the Lamp
notification of
35
Advertisement
Table of Contents
