Table of Contents
Advertisement
VPL-DW241
Input signal
4:3
16:9
16:10
4:3
16:9
22
The Screen Menu
*1: If you select "Normal," the image is
Recommended
setting value and
projected image
*1 *2 *3
Full1
*2: If you select "Full2," the image is projected
*1 *2 *3
Full1
*3: If you adjust the projected image position
*3
Full1
*4 *5
4:3
*4: Depending on the input signal, the
16:9
*5: Depending on the input signal, the image
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
to fit the projected image size, regardless
of the aspect ratio of the image.
using an image with 16:9 aspect ratio and
then switch the input source to 4:3 image,
the top and bottom edge of the image may
be hidden. In this case, select "Full3."
projected image may be projected as
illustrated below. In this case, select
"16:9."
may be projected as illustrated below. In
this case, select "Zoom."
Advertisement
Table of Contents
