Table of Contents
Advertisement
6. Install the coin-cell battery.
7. Reinstall all removed parts.
8. Place the computer in an upright position. Then, reconnect the power cord and all disconnected cables
to the computer.
Note: If a locking device is available, use it to lock the computer.
Memory module
Prerequisite
Before you start, read Appendix A "Important safety information" on page 77 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Ensure that you follow the installation order for memory modules shown in the following illustration.
64
M75s-1 User Guide
Advertisement
Table of Contents
