Table of Contents
Advertisement
8. Install the computer cover.
9. Place the computer in an upright position.
10. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Note: If a locking device is available, use it to lock the computer.
Front bezel
Prerequisite
Before you start, read Appendix A "Important safety information" on page 77 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
Replacement procedure
1. Lay down the computer so that the computer cover facing up.
2. Remove the computer cover. See "Computer cover" on page 46.
.
Chapter 7
CRU replacement
47
Advertisement
Table of Contents
