Char-Broil 463262211 Product Manual page 19

11
Insert hinge pin on bottom of door into hole in bottom shelf. Press upper hinge pin in front brace, align hinge hole on top of
door, and release hinge pin into door.
12
Release the cap and nut from electronic ignition module. Attach electronic ignition module to the cart right side panel with
the nut and cap, shown A.
Connect each of the wires from the main burner electrodes into the back of the Electronic Ignition Module.
otal (2) connections.
T
Connect the two wires [(A) and (B)] from the switch wiring harness into the back of the Electronic Ignition Module.
Total (2) connections.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as (A),(B).
Electronic
ignition module
A
Cap
Nut
PRESS
Door
(A)
1
2
(B)
Wire
Top of
door
Hinge pin
on bottom
of door
19