How To Install The Wall Mount - LG LSW600B Owner's Manual

3

How to install the wall mount

<When installing on a masonry wall>
→ When you separate the 8 screws on the wall mount connected to the wall bracket for use with a wooden wall,
it is much easier to install the product.
→ When installing the product on a masonry wall, turn the 8 screws on the A part counterclockwise to separate the
screw and bracket.
→ After aligning the wall bracket to the location to install, mark the part to screw on the wall and then remove the
wall bracket.
→ Refer to page 4 to attach the wall bracket.
→ Use a level to check whether the wall mount is level.
→ If the screw cannot be assembled in the designated location inevitably, it can be assembled by rearranging to the
closest location. But, do not change 2 or more locations from the designated spot.
→ Fix the right and left side with two bolts each.
→ Wall mounting equipment will be set up based in VESA 600X400 regulation.
→ At this time, use a "+" driver (Manual or motorized) or 8mm wrench to tighten the screw so that the wall, wall
bracket and screw are completely pressed against one another.
6
A
Separate the wall mount screw.