Attaching The Ir Blaster; Optimal Location Of External Device With Ir Blaster Installed - LG AN-WL100W Owner's Manual

PrEPArATiON

ATTAChiNg ThE ir BlASTEr

■ The IR blaster allows the LG TV to control external equipment, like a cable box.
1
Connect the provided IR Blaster cable to the
IR Blaster terminal on the Wireless Media Box.
L R
A B
VIDEO L(MONO) AUDIO R
3
DC IN 12V OPTICAL DIGITAL
SERVICE ONLY
AUDIO OUT
NOTE
►When you attach the IR Blaster sensor near the remote control sensor of the external device, the
signal can be detected more efficiently.
OPTimAl lOCATiON OF ExTErNAl dEViCE WiTh ir
BlASTEr iNSTAllEd
Body of external
device with IR
Blaster installed
NOTE
►For some external devices, the IR Blaster may not operate depending on the performance of the
IR receiver.
►The operation may be delayed due to the sensitivity of the wireless signal.
10
L R A COMPONENT / AV IN 1
B
COMPONENT / AV IN 2
VIDEO L(MONO) AUDIO R
AUDIO IN
2 1
/ DVI IN RGB IN(PC) RGB/DVI SERVICE ONLY
L R
A
VIDEO L(MONO) AUDIO R
DC IN 12V OPTICAL DIGITAL
SERVICE ONLY
AUDIO OUT
2
After removing the protection paper from the
IR Blaster cable, adhere it to the external
equipment as shown.
IR Receiver
Install the external device with the IR Blaster
installed at a location it is not affected by the sig-
nal from the remote controller to the TV.
When the external device with the IR Blaster
installed receives the signal from the remote con-
troller simultaneously with the TV, it may not
operate.
A COMPONENT / AV IN 1
L R
B
B
COMPONENT / AV IN 2
VIDEO L(MONO) AUDIO R
AUDIO IN
3 2 1
/ DVI IN RGB IN(PC) RGB/DVI SERVICE ONLY