Wireless Ready Dongle; Connecting To The Tv - LG AN-WL100W Owner's Manual

PrEPArATiON

WirElESS rEAdY dONglE

■ Image shown may differ slightly from your device.
Wireless Control Port
1
This port is used to send and receive commands between the TV and the Wireless Media Box.
HDMI Out Port
2
This port sends the audio and video received from the Wireless Media Box to the TV.

CONNECTiNg TO ThE TV.

■ Image shown may differ slightly from your device.
1
Use the provided 20 pin cable (power/control) to connect to the wireless control port of the
Wireless Ready Dongle and the wireless control port on the TV.
2
Now connect the HDMI to both the TV and the Wireless Ready Dongle.
NOTE
►Install the Wireless Ready Dongle with the power of the TV turned off.
►Use the wireless control jack and 20 pin cable only for connecting the Wireless Ready TV and
Wireless Ready Dongle. When used for other purposes, it can cause an error or damage to the
product.
6
2
1
WIRELESS
OUT
CONTROL
2
1
WIRELESS
OUT
CONTROL
WIRELESS
CONTROL
IN