Gigabyte GA-X99-Ultra Gaming User Manual page 73

C-3. Configuring Legacy RAID ROM
Enter the Intel legacy RAID BIOS setup utility to configure a RAID array. Skip this step and proceed with the
®
installation of Windows operating system for a non-RAID configuration.
Step 1:
In BIOS Setup, go to BIOS and set CSM Support to Enabled and Storage Boot Option Control to Legacy
Only. Save the changes and exit BIOS Setup. After the POST memory test begins and before the operating
system boot begins, look for a message which says "Press <Ctrl-I> to enter Configuration Utility" (Figure 13).
Press <Ctrl> + <I> to enter the RAID Configuration Utility.
Intel(R) Rapid Storage Technology - Option ROM - 14.8.0.2377
Copyright (C) Intel Corporation. All Rights Reserved.
RAID Volumes :
None defined.
Physical Devices :
ID Device Model
1 Hitachi HDS72105
2 Hitachi HDS72105
Press <CTRL - I> to enter Configuration Utility...
Step 2:
After you press <Ctrl> + <I>, the MAIN MENU screen will appear (Figure 14).
Create RAID Volume
If you want to create a RAID array, select Create RAID Volume in MAIN MENU and press <Enter>.
Intel(R) Rapid Storage Technology - Option ROM - 14.8.0.2377
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volumes :
None defined.
Physical Deivces :
ID Device Model
1 Hitachi HDS72105
2 Hitachi HDS72105
[hi]-Select
Serial #
JP1532FR3BWV7K
JP1532ER046M2K
Figure 13
Copyright (C) Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
Serial #
JP1532FR3BWV7K
JP1532ER046M2K
[ESC]-Exit
Figure 14
- 73 -
Size Type/Status(Vol ID)
465.7GB Non-RAID Disk
465.7GB Non-RAID Disk
4. Recovery Volume Options
5. Acceleration Options
6. Exit
Size Type/Status(Vol ID)
465.7GB Non-RAID Disk
465.7GB Non-RAID Disk
[ENTER]-Select Menu
Configuring a RAID Set