Gigabyte GA-X99-Ultra Gaming User Manual page 29

12) M2_32G (M.2 Socket 3 Connector)
You can insert an M.2 SSD into this connector.
Follow the steps below to correctly install an M.2 SSD in the M.2 connector.
Step 1:
Use a screw driver to unfasten the screw and nut
from the motherboard. Locate the proper mount-
ing hole for the M.2 SSD to be installed and then
screw the nut first.
Step 3:
Press the M.2 SSD down and then secure it with
the screw.
Select the proper hole for the M.2 SSD to be installed and refasten the screw and nut.
_ 0
110 80 60
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 4:
The installation is completed, as shown in the
picture above.
- 29 -
_ F
F
42
Hardware Installation