USB
Chipset+Intel
-
1 x USB Type-C
-
1 x USB 3.1 Type-A port (red) on the back panel
Chipset+2 Renesas
-
8 x USB 3.0/2.0 ports (4 ports on the back panel, 4 ports available through
the internal USB headers)
Chipset:
-
2 x USB 3.0/2.0 ports on the back panel
-
4 x USB 2.0/1.1 ports available through the internal USB headers
Internal
1 x 24-pin ATX main power connector
Connectors
1 x 8-pin ATX 12V power connector
1 x PCIe power connector
1 x CPU fan header
1 x water cooling fan/water cooling pump header (CPU_OPT_PUMP)
2 x system fan headers
1 x system fan/water cooling pump header (SYS_FAN3_PUMP)
1 x RGB LED strip extension cable header
1 x SATA Express connector
10 x SATA 6Gb/s connectors
1 x M.2 Socket 3 connector
1 x U.2 connector
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
2 x USB 3.0/2.0 headers
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module (TPM) header
1 x Thunderbolt
1 x Clear CMOS jumper
Back Panel
1 x PS/2 keyboard/mouse port
Connectors
2 x Wi-Fi antenna connector holes
1 x USB Type-C
1 x USB 3.1 Type-A port (red)
6 x USB 3.0/2.0 ports
2 x RJ-45 ports
1 x optical S/PDIF Out connector
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Line Out, Mic In)
I/O Controller
iTE
I/O Controller Chip
®
Hardware
System voltage detection
Monitor
CPU/System/Chipset temperature detection
CPU/CPU OPT/System fan (pump) speed detection
CPU/System/Chipset overheating warning
CPU/CPU OPT/System fan (pump) fail warning
CPU/CPU OPT/System fan (pump) speed control
* W hether the fan speed control function is supported will depend on the fan (pump)
USB 3.1 controller:
®
port on the back panel, with USB 3.1 support
™
USB 3.0 Hubs:
®
add-in card connector
™
port, with USB 3.1 support
™
you install.
- 11 -
Hardware Installation