Gigabyte GA-X99-Ultra Gaming User Manual page 50

` Smart Fan Settings
& Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU)
& CPU Temperature
Displays current CPU temperature.
& 1st System Temperature/2nd System Temperature
Displays current system temperatures detected by the system temperature sensors on the motherboard.
& 3rd System Temperature
Displays current Chipset temperature.
& Fan Speed (CPU_FAN, CPU_OPT_PUMP, SYS_FAN1, SYS_FAN2, and SYS_FAN3_PUMP
Connectors)
Displays current CPU/CPU water cooling/system/system fan/pump fan speeds.
& CPU/System/PCH Temperature Warning
Sets the warning threshold for CPU/system/Chipset temperature. When temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
90 C/194 F.
o o
& CPU/CPU OPT/Pump/System Fan/Pump Fail Warning
Allows the system to emit warning sound if the fan/pump is not connected or fails. Check the fan/pump
condition or fan/pump connection when this occurs. (Default: Disabled)
& CPU Fan Speed Control (CPU_FAN Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Allows the fan to run at different speeds according to the CPU temperature. You
Normal
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed in the curve graph.
Manual
Full Speed Allows the fan to run at full speeds.
BIOS Setup
C/140 F, 70
o o
- 50 -
C/158 F, 80 C/176 F,
o o o o