Table of Contents
Advertisement
ENGLISH
Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/
support for a list of frequently asked questions or
contact the Consumer Care Centre in your country.
Possible cause
The shaving heads are
damaged or worn.
Long hairs obstruct
the shaving heads.
Specific types only: The
Jet Clean System has
not cleaned the shaver
properly, because the
cleaning fluid in the
cleaning chamber is
soiled or the cleaning
fluid level is too low.
The rechargeable
battery is empty.
Specific types only: The
travel lock is activated.
53
Solution
Replace the shaving head
holder (see chapter
'Replacement').
Clean the shaving heads
by following the steps
of the extra-thorough
cleaning method (see
chapter 'Cleaning and
maintenance').
Clean the shaver
thoroughly before you
continue shaving. If
necessary, clean and refill
the cleaning chamber (see
chapter 'Cleaning and
maintenance').
Recharge the battery (see
chapter 'Charging').
Press the on/off button
for 3 seconds to
deactivate the travel lock.
Advertisement
Table of Contents
