Philips RQ1131/12 Manual page 33

1 Pull the shaving head holder off the bottom
part of the shaving unit.
2 Slide the green retaining frame in the direction
of the arrows indicated on the retaining frame.
3 Lift the retaining frame out of the shaving head
holder.
4 Remove the cutter from the shaving guard.
Note: Do not clean more than one cutter and shaving
guard at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
5 Clean the cutter with the cleaning brush
supplied.
32
ENGLISH