Panasonic PT-AR100EH Operating Instructions (Functional Manual) page 49

Table of Contents

Advertisement

4)
Press the ▲▼ buttons to select a menu
item and the ◄► buttons to adjust each
item level.
Adjust the vividness of the
color.
[COLOUR]
z
Adjust the color tone.
[TINT]
z
Adjust the brightness of the
color.
[BRIGHTNESS]
z
The default setting for each item is [0].
z
After adjusting, the post-adjustment color (D) is
displayed.
RED
COLOUR
DEFAULT
ENTER
TINT
SELECT
BRIGHTNESS
RETURN
Screen
5)
Press the <ENTER> button.
[PROCESSING] message is displayed for a few
z
seconds and the result is stored in [LOG].
You can store up to 6 different color adjusted
images under [LOG]. Press the <RETURN>
button to adjust the other colors. Repeat from
step 3) to store more adjustments.
6)
Press the <RETURN> button or <MENU>
button twice.
This returns you to the [COLOUR
z
MANAGEMENT] menu.
Note
Base color
(C) and post-adjustment color (D) (displayed
z
when [ADJUSTMENT MODE] is set to [RGBCMY]), are
intended to be guide colors only.
Setting range:
−30 to +30
Setting range:
−30 to +30
Setting range:
−20 to +20
0
0
0
[PICTURE] menu
Editing/deleting logs
You can edit or delete stored logs.
Press the ▲▼ buttons to select [LOG] and
press the <ENTER> button.
The [LOG] menu is displayed.
z
Managing the stored logs created through the
z
[CURSOR] mode
LOG
ADJUSTMENT MODE
PICTURE MODE
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Selected
color
Press ▲ ▼ to select the point you wish
to edit, and press the <ENTER> button
to display the screen to select [CHANGE]
or [DELETE].
[CHANGE]: The [CURSOR] menu is
displayed and you can
readjust the color.
[POINT]
[DELETE]: Deletes point adjustment
[1] - [8]
data.
Press the <ENTER> button
to display a confirmation
message.
Select [OK] with the
buttons and press the
<ENTER> button to delete.
When [ALL DELETE] is selected using
the ▲▼ buttons and <ENTER> is
pressed, a confirmation message is
[ALL
displayed.
DELETE]
Select [OK] with the
the <ENTER> button to delete all logs.
The [PROFILE] setting will be set to
[NORMAL] if all logs are deleted.
: CURSOR
: NORMAL
COLOUR TINT BRIGHTNESS
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
+10
Adjusted
color
buttons and press
ENGLISH - 49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-ah100eh

Table of Contents