Eco Icon Display - Samsung S32D850T User Manual

6
Setup and Reset

6.1.3 Eco Icon Display

Configuring Eco Icon Display
1
Press any button on the front of the product to display the Function Key Guide. Next, press [
display the corresponding menu screen.
2
Press [
3
Press [
4
Press [
The following screen will appear.
Off: Disable the Eco Icon Display function.

On: Display the operation status of the Eco sensor as a pop-up guide.

5
Press [
6
The selected option will be applied.
Notes
If the screen brightness is adjusted according to the ambient light intensity when the

Eco Light Sensor
brightness.
If the screen becomes brighter as the ambient light becomes brighter, the brightness slide bar level

will increase with a sun image displayed. If the screen becomes darker, the brightness slide bar level
will decrease with a moon image displayed. The brightness slide bar will be displayed for 3 seconds
after the sensor activates.
While in the check signal or no signal mode, the monitor will not display the OSD.

] to move to Settings and press [
] to move to ECO and press [
] to move to Eco Icon Display
ECO
Eco Light Sensor
Sensitivity
Brightness Level
Eco Saving
Eco Icon Display
] to move to the option you want and press [
Eco Light Sensor Activated
is on, a pop-up as shown above will appear showing the adjusting screen
] on the product.
] on the product.
and press [ ] on the product.
Select the ECO Icon
Off mode.
Off
Off
On
].
Eco Light Sensor Activated
] to
76
6 Setup and Reset