Table of Contents
Advertisement
1
Preparations
Icons
Description
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness, contrast and volume.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (DVI/HDMI/DisplayPort). If you power on the
product or change the input source by pressing the [
] button, a
message that shows the changed input source will appear at the top left
corner of the screen.
Press the button when configuring settings for the
PIP/PBP
function is
required.
Turn the screen on or off.
When a control button on the product is pressed, the Function Key Guide
will be displayed before the onscreen menu opens.
(The guide shows the function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the
Function Key Guide
corresponding button again.
The Function Key Guide may vary depending on the function or product
model.
Refer to the actual product.
20
1 Preparations
Advertisement
Table of Contents
