Vcr Setup - LG 32LV2400 Owner's Manual

VCR Setup

Antenna Connection
1. How to connect
Connect the RF antenna out
1
socket of the VCR to the
ANTENNA/CABLE IN socket on
the TV.
Connect the antenna cable to
2
the RF antenna in socket of the
VCR.
2. How to use
r Set VCR output switch to 3 or 4 and
then tune TV to the same channel
number.
r Insert a video tape into the VCR and
press PLAY on the VCR (Refer to the
VCR owner's manual).
Composite (RCA) Connection
1. How to connect
Connect the AUDIO/VIDEO
1
jacks between TV and VCR.
Match the jack colors (Video =
yellow, Audio Left = white, and
Audio Right = red)
2. How to use
r Insert a video tape into the VCR and
press PLAY on the VCR. (Refer to the
VCR owner's manual.)
r Select the AV
using the INPUT
control.
NOTE
a If you have a mono VCR, connect the audio cable from the VCR to the AUDIO
L(MONO) jack of the TV.
20
input source on the TV
button on the remote
1
ANT OUT S-VIDEO
ANT IN OUTPUT
SWITCH
Wall Jack
2
Antenna
1
ANT IN S-VIDEO VIDEO L R
AUDIO
ANT OUT OUTPUT
SWITCH
VIDEO L R
AUDIO