Table of Contents
Advertisement
Pillow Speaker
Connect the pillow speaker (see example below)
to the PILLOW SPEAKER interface on the rear jack
panel of the TV.
Typical Pillow Speaker
(Serial Data Control)
Pillow Speaker Interface Pinout
Network setup
(Depending upon model)
Wired network connection
This TV can be connected to a Pro:Centric server
via the
port. After making the physical
connection, the TV needs to be set up for network
communication.
Connect the
port of the Modem or Router from
Pro:Centric server to the
2
Broadband Modem
Broadband Modem
Pro:Centric Server
1 Connect the
port of the Modem or Router to
the
port on the TV.
2 Connect the
port of the PC to the
port on the TV. (Depending upon model)
• Do not connect a modular phone cable to the
port.
• Since there are various connection methods, please
follow the specifications of your telecommunication
carrier or internet service provider.
port on the TV.
1
Router
Broadband Modem
Pro:Centric Server
13
Advertisement
Table of Contents
