Table of Contents
Advertisement
Quick Links
Fountain Components
Item Description
Image
Borghese
Fountain - Finial
Borghese
Fountain - Bowl
Borghese
Fountain -
Pedestal
Fountain Information:
• This fountain holds approximately 2.5 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP45DLV-120GHP Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Scissors
Component
Quantity
Item #
FT-219A
1
FT-219B
1
FT-219C
1
FT-219 Borghese Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK120-LV Pump w/ Transformer
#10 Stopper
2" length of Perma Gum Putty
Approx. 6" length of 1/2" black
non-kink tubing
Approx 1" length of 5/8" clear vinyl
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
1
1
1
tuning
Wedges
2
1
rev 10/6//2021
Advertisement
Table of Contents
Related Manuals for Campania International FT-219A
Summary of Contents for Campania International FT-219A
- Page 1 Image Component Quantity Item Description Image Quantity Item # PK120-LV Pump w/ Transformer Borghese FT-219A Fountain - Finial #10 Stopper 2" length of Perma Gum Putty Borghese FT-219B Fountain - Bowl Approx. 6" length of 1/2" black non-kink tubing Approx 1" length of 5/8" clear vinyl...
- Page 2 FT-219 Borghese Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
- Page 3 Step 7 - Fit the 5/8" clear tubing onto the copper pipe protruding from the inside bottom of the water feature (FT-219A). Step 8 - Carefully lower the water feature (FT-219A) into the basin. 8a - Turn the feature to coil the tubing as you lower it into the position.
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - Ensure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.
Need help?
Do you have a question about the FT-219A and is the answer not in the manual?
Questions and answers