Video Output Signals And Servo Reference Signal - Panasonic AJSD930P Operating Instructions Manual

Video output signals and servo reference signal

This section explains how the output signals and
servo reference signal are selected.
External synchronization of video
output signals
The video output signals are output in synchronization
with the REF VIDEO input signal or video input signal.
As shown in the figure below, this signal is selected in
accordance with the setup menu settings, VTR mode
and availability of the video input signal.
Start
EXT
What is the
setup menu No. 304 (SERVO
REF) setting?
AUTO
Is the unit
in one of the editing
modes?
NO
Has the unit
been set to the recording
mode?
NO
Is the
REF VIDEO input signal
available?
NO
Internal synchronization
58
<Notes>
Synchronization is determined as follows depending
on the availability of the REF VIDEO input signal
when "BB", "CB100" or "CB75" has been selected as
the setup menu No. 600 (INT SG) setting.
O When the REF VIDEO input signal is available:
Synchronization with the REF VIDEO input signal
O When the REF VIDEO input signal is not available:
Internal synchronization
YES
YES
Is the
REF VIDEO input signal
available?
YES
YES
Synchronization with the
REF VIDEO input signal
N-VF
What is the
setup menu No. 601 (OUT
VSYNC) setting?
VF
NO
NO
Is the
video input signal available?
YES
Is the
video input signal a composite
signal?
YES
What is
NON-STD
the setup menu No. 303
(STD/NON-STD)
setting?
AUTO
Is the
NON-STD
video input signal a standard
or non-standard signal?
STD
Synchronization with
the video input signal
NO
STD