Table of Contents
Advertisement
Parts and their functions
Front panel
ON
POWER
DVCPRO 50
DVCPRO
DV
OFF
COUNTER
METER
FULL/FINE
RESET
L
MONITOR SELECT
R
PREVIEW/PREVIEW
AUTO EDIT
PREROLL
MONITOR MIX
INPUT SELECT
HEADPHONES
VIDEO
AUDIO
CH1
CH2
CH3
CH4
TC
PRESET MENU
UNITY
REC LEVEL
PB LEVEL
VAR
TRIM button
6 PLAY button
Press this button to start playback.
When this button is pressed together with the REC
button, recording starts.
On the AJ-SD955A, when this button is pressed
together with the EDIT button during playback, manual
editing starts. However, manual editing will not be
initiated if the servo is not locked. When only the
PLAY button is pressed during manual editing, editing
is exited, and the playback mode is established.
When the TRIM+ (or TRIM–) button is pressed while
this button is held down, playback speed will be
increased (or decreased) by the frame mode unit
selected for the setup menu No. 108 (CAP. LOCK)
setting each time one of the TRIM buttons is pressed.
<Note>
The servo lamp turns off while the speed is being
increased or decreased. At this time, nise occur in the
playback audio signal.
7 REC button
When this button is pressed together with the PLAY
button, recording starts.
When it is pressed during playback, a search, fast
forwarding or rewinding, the E-E mode pictures and
audio signals can be monitored while it is held down.
When it is pressed in the stop mode, the E-E mode
pictures and audio signals can be monitored. When
the STOP button is pressed, the original pictures and
sound are restored.
8 STOP button
When this button is pressed, the tape stops traveling,
and if the MODE switch is set to TAPE, still pictures
can be monitored. Even in the stop mode, the drum
continues to rotate, and the tape remains tightly
wound around the drum.
When the VTR is left in the stop mode beyond a
specific period of time (which can be selected using
setup menu No. 400 to 403), it is automatically set to
the standby OFF mode or STEP FWD mode in order
to protect the tape. The VTR is set to the stop mode
immediately after the cassette has been inserted.
6
;
<
6
7
9
JOG
SHTL
SLOW
ASSEM VIDEO
CUE
TC
STAND BY
PLAYER
RECORDER
CH1
CH2
CH3
CH4
EDIT
PLAY
REC
INSERT
A IN
A OUT
TRIM
REW
STOP
FF
SET
IN
OUT
SUPER
REC INH INT
TCG
MODE
CONTROL
SET
DIAG
REGEN
ON
ON
TAPE
REMOTE
PRESET
OFF
OFF
EXIT
EE
LOCAL
MODE switch
:
8
9 FF button
When this button is pressed, the tape is fast
forwarded.
The fast forwarding speed can be selected using
setup menu No.102 (FF. REW MAX).
: REW button
When this button is pressed, the tape is rewound.
The rewinding speed can be selected using setup
menu No.102 (FF. REW MAX).
SD955A
; EDIT button
This button is pressed together with the PLAY button
during playback to initiate manual editing.
When it is pressed during playback, a search, fast
forwarding or rewinding, the input signals in the mode
selected by the ASSEM button or INSERT button can
be monitored in the E-E mode while the button is held
down.
When the button is pressed in the stop mode, the
input signals in the mode selected by the ASSEM
button or INSERT button can be monitored in the E-E
mode.
When the STOP button is pressed, the original
pictures and sound are restored.
SD955A
< STAND BY button
In the standby ON mode, this button's lamp lights to
indicate that the same tape tension is applied as in the
regular stop mode and that the head drum is rotating.
In the standby OFF mode, the half loading mode is
established by this button.
When the button is pressed in the stop mode, the
standby OFF mode is established. At this time, its
lamp goes off.
When the VTR is left in the stop mode beyond a
specific period of time, it is automatically set to the
standby OFF mode in order to protect the tape.
When this button or the STOP button is pressed in the
standby OFF mode, the VTR is set to the standby ON
mode.
When a button other than the STOP button is pressed,
the VTR is set to the mode that corresponds to the
button pressed. The time taken by the VTR to transfer
to the standby OFF mode can be selected using setup
menu No. 400 (STILL TIMER).
Advertisement
Table of Contents
