Table of Contents
Advertisement
Quick Links
Assembly Instructions for Model DC050
PRE-ASSEMBLY
•
Please read all instructions before beginning assembly. We strongly recommend
you watch the video at www.victortech.com/High-Rise.
•
Remove all parts and hardware from box and lay out on a scratch-free work surface,
as this will avoid damaging any parts during assembly. The shipping box provides
an ideal work surface.
•
Do not dispose of any contents or packaging material until assembly is complete.
This will help to avoid accidentally discarding small parts or hardware.
•
For your safety and ease, adult assembly by two people is recommended.
•
Use the parts and hardware lists to identify and separate each of the pieces included
prior to starting assembly.
•
Do not use power tools. Use only the included screwdriver.
Power tools can damage hardware and split wood.
Missing Parts or UPS Damaged Parts?
For your convenience you can E-mail us at
victor@victortech.com
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts
are missing, broken, or worn, stop use of the product until repairs are made using Victor authorized parts.
Need Help? Watch the video at www.victortech.com/High-Rise
High Rise™ Monitor Stand
With Built-In Shelf
If you require assistance during assembly, please call our
Customer Service Department
Monday – Friday 8 am to 4 pm CST 1-800-628-2420
Or watch our video at Victortech.com/High-Rise
Advertisement
Table of Contents
Related Manuals for Victor High Rise DC050
Summary of Contents for Victor High Rise DC050
- Page 1 Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, or worn, stop use of the product until repairs are made using Victor authorized parts.
- Page 2 Parts List Missing Parts? Call 1-800-628-2420 for Victor customer service. Hardware List A： Dowel 11Pcs B： Cam Lock 11Pcs C： Screwdriver Need Help? Watch the video at www.victortech.com/High-Rise...
- Page 3 This product uses a system of Dowels and Cam Locks to connect pieces together. (1) The Dowel is inserted into one part with a screwdriver. (2) The Cam Lock is inserted in a hole on the other part. (Note: The Cam Lock may come already assembled into the wood).
- Page 4 Step 1 Use Screwdriver to insert Dowels into small white threaded holes on Parts 2, 3, and 4. Insertion should be easy. If strong force is required, back out the Dowel and start again. Turn Dowel until all threads are no longer visible. NOTE: In Steps 2, 3, and 4, you will be assembling the product upside down.
- Page 5 Step 3 Attach Parts 2 and 3 to Part 5. The two Dowels on Part 2 go into the side access holes on Part 5. The two Dowels on Part 3 go into the other side access holes on Part 5. Step 4 Turn Cam Locks on Part 5 one-half rotation clockwise to complete the connection.
- Page 6 Step 5 Use Screwdriver to insert Dowels into small white threaded holes on Part 1. Step 6 Flip the assembly right-side up. Attach Part 1 to Parts 2, 3, and 4. The Dowels from Part 1 go into the top access holes of Parts 2, 3, and 4. Turn Cam Locks on Parts 2, 3, and 4 one-half rotation clockwise to complete the connection.
- Page 7 Place the High Rise™ Monitor Stand on a desk. If taller height is desired, assemble optional Height Extenders (Parts 6, 7, 8, and 9) to the bottom of each leg. This will add 1 inch of height to the work surface. Victor Technology www.victortech.com Bolingbrook, IL USA 1-800-628-2420 * This unit has been designed to accommodate up to 50 lbs.
Need help?
Do you have a question about the High Rise DC050 and is the answer not in the manual?
Questions and answers