Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Victor Manuals
  4. Indoor Furnishing
  5. DC300
  6. Assembly instructions manual

Victor DC300 Assembly Instructions Manual

High rise sit-stand desk converter
Hide thumbs Also See for DC300:

Advertisement

Quick Links

Download this manual
High Rise™Sit-Stand
Assembly Instructions for Model DC300
•
Please read all instructions before beginning assembly. We strongly recommend
you watch the video at www.victortech.com/High-Rise.
•
Remove all parts and hardware from box and lay out on a scratch-free work surface,
as this will avoid damaging any parts during assembly.
•
Do not dispose of any contents or packaging material until assembly is complete.
This will help to avoid accidentally discarding small parts or hardware.
•
For your safety and ease, adult assembly by two people is recommended.
•
Use the parts and hardware lists to identify and separate each of the pieces included
prior to starting assembly.
•
Do not use power tools. Use only the included Hex Keys. Power tools can damage
hardware and split wood.
Need Help? Watch the video at www.victortech.com/High-Rise
Desk Converter
PRE-ASSEMBLY
Patent
Pending
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the DC300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Victor DC300

Summary of Contents for Victor DC300

  • Page 1 High Rise™Sit-Stand Desk Converter Assembly Instructions for Model DC300 Patent Pending PRE-ASSEMBLY • Please read all instructions before beginning assembly. We strongly recommend you watch the video at www.victortech.com/High-Rise. • Remove all parts and hardware from box and lay out on a scratch-free work surface, as this will avoid damaging any parts during assembly.

  • Page 2: Parts List

    Parts List Tower Missing Parts? Call 1-800-628-2420 Monitor Monitor Bracket Holder Stabilizers Desk Surface Steel Base Hardware Bag: Bolt M6*15mm 5 pcs Bolt M6*40mm 2 pcs Nut Cap 2 pcs Bolt M6*40mm 2pcs Thumb Nuts 2 pcs Small Hex Keys 1pcs Thumb Screws 4 pcs...
  • Page 3 Step 1: Remove Retention Straps from the Tower The Tower will be packaged in a compressed position. The Retention Straps should be removed before assembly. The Retention Straps prevent the Tower from movement during shipment and are not required for product use. Follow these steps for removal: 1.
  • Page 4 Step 2: Attach Tower to Steel Base The Tower will be packaged in a compressed position. Do not loosen the knobs until the Tower is attached to the Base. This will make assembly easier. For safety, two people must perform the following steps. 1.
  • Page 5 Step 3: Attach Desk Surface to Tower 4 - 5 Attach the Desk Surface to the Tower. 1. Rotate the lower knob counter clockwise to loosen the Tower and allow it to rise. 2. Place the Washer on the Long Bolt and insert the Long Bolt through the Cross Bar on the Desk Surface.
  • Page 6 Step 4: Attach Upper Cross Bar to Desk Cross Bar 1. Insert two M6*40mm bolts through the upper cross bar and into the desk crossbar. 2. Tighten using the small hex key. Do not over tighten. TIP: While tightening, lift the front of the desk slightly to better align the holes and reduce the effort to tighten the bolts.
  • Page 7 Step 5: Attach Monitor Bracket to Monitor& Tower 2 - 4 1. The DC300 comes with a VESA bracket designed to fit most monitors. Your monitor is compatible if there are four screw holes in the center of the back of the monitor.
  • Page 8 Use only when all fasteners are tight. At least every six months, tighten all fasteners. If parts are missing, broken, or worn, stop use of the product until repairs are made using Victor authorized parts. Need Help? Watch the video at www.victortech.com/High-Rise...
  • Page 9 Step 7: Adjust the Monitor Tilt or Height The bracket allows the monitor to tilt up or down. Tighten the mechanism by turning the wrench clockwise on the bolt head. For more firm rotation, tighten the hex bolt. When looking at the monitor from the front, push the monitor to the left to expose the Tower behind the monitor.
  • Page 10 Step 8: Stabilize the Desk Surface (Optional) 1. Your DC300 Desk Converter is now fully operational. You may desire the desk surface to feel more secure when in the standing position. For this, two Stabilizers have been provided. To use them, first set the desk surface to the desired height.
  • Page 11 This will reduce the amount of strain on your body. Wear comfortable shoes. Get an Anti-Fatigue Mat: Standing on a hard surface could hurt your joints. We recommend standing on a soft surface. Victor Technology www.victortech.com Bolingbrook, IL USA 1-800-628-2420 Need Help? Watch the video at www.victortech.com/High-Rise...