Advertisement
High Rise™ Stand-Up Desk Converter
Assembly Instructions for Model DC100
PRE-ASSEMBLY
•
Please read all instructions before beginning assembly. We strongly recommend
you watch the video at www.victortech.com/High-Rise.
•
Remove all parts and hardware from box and lay out on a scratch-free work surface,
as this will avoid damaging any parts during assembly. The shipping box provides
an ideal work surface.
•
Do not dispose of any contents or packaging material until assembly is complete.
This will help to avoid accidentally discarding small parts or hardware.
•
For your safety and ease, adult assembly by two people is recommended.
•
Use the parts and hardware lists to identify and separate each of the pieces included
prior to starting assembly.
•
Do not use power tools. Use only the included screwdriver.
Power tools can damage hardware and split wood.
Missing Parts or UPS Damaged Parts?
For your convenience you can E-mail us at
victor@victortech.com
Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts
are missing, broken, or worn, stop use of the product until repairs are made using Victor authorized parts.
Need Help? Watch the video at www.victortech.com/High-Rise
With Built-In Shelf
If you require assistance during assembly, please call our
Customer Service Department
Monday – Friday 8 am to 4 pm CST 1-800-628-2420
Or watch our video at Victortech.com/High-Rise
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Victor DC100
Summary of Contents for Victor DC100
- Page 1 Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight. If parts are missing, broken, or worn, stop use of the product until repairs are made using Victor authorized parts.
-
Page 2: Parts List
Parts List Missing Parts? Call 1-800-628-2420 for Victor customer service. Hardware List A：Dowel 11 + 2 Extra B：Cam Lock 11 Installed + 2 Extra C：Screwdriver Need Help? Watch the video at www.victortech.com/High-Rise... - Page 3 This product uses a system of Dowels and Cam Locks to connect pieces together. (1) The Dowel is inserted into one part with a screwdriver. (2) The Cam Lock is inserted in a hole on the other part. (Note: The Cam Lock may come already assembled into the wood).
- Page 4 Step 1 Use Screwdriver to insert Dowels into small white threaded holes on Parts 2, 3, and 4. Insertion should be easy. If strong force is required, back out the Dowel and start again. Turn Dowel until all threads are no longer visible. NOTE: In Steps 2, 3, and 4, you will be assembling the product upside down.
- Page 5 Attach Parts 2 and 3 to Part 5. The two Dowels on Part 2 go into the side access holes on Part 5. The two Dowels on Part 3 go into the other side access holes on Part 5. TIP: If a Cam Lock does not connect firmly, make sure the inserted dowel is turned all the way into the small white threaded hole.
- Page 6 Use Screwdriver to insert Dowels into small white threaded holes on Part 1. TIP: If a Cam Lock does not connect firmly, make sure the inserted dowel is turned all the way into the small white threaded hole. If not, the Cam will not lock. Flip the assembly right-side up.
- Page 7 Bolingbrook, IL USA 1-800-628-2420 * We recommend not leaning on the DC100 High Rise Stand-Up Desk Converter. Doing so may cause the unit to tip or break. * This unit has been tested to accommodate up to 50 lbs. We recommend not exceeding this limit.
Need help?
Do you have a question about the DC100 and is the answer not in the manual?
Questions and answers