LG multi V ARUN Series Installation Manual page 92

Test Run
Integrated Test Running Function_Cooling Mode (Setting 3)
This function is checking process for normal operation of parts and system On operating system.
• All processes carry out included refrigerant amount judge logic and check normal condition of parts on
cooling mode.
• This function check only normal condition of parts on heating mode.
• Saved data can check using LGMV.
Refrigerant amount judge
during all IDU operation
data on Test Runing(15min)
Note
1. Judge the normal condition refer to report of Test Running.
92 Outdoor Unit
Start
Press the black button for 2 sec
All IDU operation on
Cooling mode
Temp. Condition
Yes
Thermo off
IDU judge
Yes
1 IDU operation
Note 1
1 IDU operation data
(10min)
Warning : Please reset Main PCB before starting this function
No
DIP Switch Settings
Error Display
Error Display
Press the black button for 2 sec
End
Press the black button for 2 sec.
after turning off all of Dip switch.
Completed