Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the
image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
■ Image shown may differ from your TV.
PICTURE
• Brightness
• Sharpness
• Colour
• Tint
• Colour Temp.
• Advanced Control
• Picture Reset
• Screen
• Screen
1
or
MENU
Home
2
Select Screen.
3
Select Auto Config..
4
Select Yes.
5
Run Auto Config..
Move
OK
50
70
60
0
R
G
0
W
C
If the position of the image is still not correct,
•
Select PICTURE.
try Auto adjustment again.
If picture needs to be adjusted again after
•
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
• Press the MENU or Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
SCREEN
Move
Resolution
Auto Config.
Position
Auto Config.
Size
Yes
No
Phase
Reset
Prev.
13