Auto Configure (Rgb [Pc] Mode Only) - LG M2080DFM Owner's Manual

Auto Configure (RGB [PC] mode only)

Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is
still not correct, your set is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, clock, and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
1. Using OSD
PICTURE
Screen(RGB-)PC
Screen(RGB-)PC
1
0(18
Select PICTURE.
2
(QWHU
Select Screen.
3
(QWHU
Select Auto Config.
4
(QWHU
Select Yes.
2. Using Auto Config. (Remocon)
This function is available for RGB signals only.
<M2080DF>
1
Press Auto Config.
<M2280DF, M2380DF >
1
Press Auto Config.
Move
Enter
• Contrast 100
• Brightness 50
• Sharpness 50
• Colour 50
• Tint 0
• Advanced Control
• Picture Reset
• Press the MENU or EXIT button to close the menu window.
• Press the BACK button to move to the previous menu screen.
Auto in progress
<1600 x 900 Resolution>
Auto in progress
<1920 x 1080 Resolution>
SCREEN
Resolution
Auto Config.
Position
Size
Phase
Reset
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the
Posi tion, Size or Phase.
5
(QWHU
Run Auto Config.
!
change resolution 1600 x 900
<Others Resolution>
!
change resolution 1920 x 1080
<Others Resolution>
Move Prev.
To Set
Yes No
Auto in progress
For optimal display
Auto in progress
For optimal display